Our California warehouse and converting facility, located
in the heart of the Los Angeles basin, with over 56,000 square
feet of warehousing, is equipped with:
3 Slitters/Rewinders -
Cameron 110 inches (2794 mm), Cameron 74 inches (1880 mm) and
Cameron 72 inches (1828 mm)
2 Sheeters - Maxson 57
inches ( 1448 mm), and Hamblet 83 inches (2108 mm)
1 Guillotine - Seybold 72
inches (1828 mm)
We have offered on-site custom paper
converting services to the local trade since 1990. Similar
services can be provided at other strategically located
warehouses through contracted converters.
The service offered by Metro Pacific
domestic distribution handles smaller customer deliveries and
provides a stocking service, on behalf of suppliers.
We have served the converting needs of Paper
Mills and Distributors, Printers and publishers, and Folding
carton and Corrugated box makers in California since 1990. Our
equipment consists of 2 Sheeters, 2 Slitter/Rewinders, and a
Guillotine Trimmer to handle all grades of Paper and
Paperboard. We can custom prepare orders with minimal lead
time, and 100% accuracy.
Our Slitter/Rewinder can slit and rewind
rolls up to 110 inches wide, with diameters of up to 72
inches, and they can handle roll weight up to 8,000 lbs. each.
We can slit rolls to any size all the way down to 0.75 inches
or 19 mm in width. Our main Sheeter runs at a speed of 1,000
FPM and has the capacity to handle rolls of up to 57 inches
wide, with diameters of up to 84 inches. We can slit and trim
on line, and guarantee the sheets to be de-curled (flat),
square, dust-free, static-free.
Our other Sheeter can handle rolls up to 83
inches wide, and our Guillotine/Trimmer can handle sheet sizes
up to 72 inches in either dimension. Our sheeting capacity is
about 80 Tons per day on both our Sheeters, and our rewinding
capacity is about 50 Tons per day on our 2 Rewinders. The
exact capacity will depend on the thickness and the size of
the paper being converted.